AudioControl EPICENTER 1200 Monoblock Amplifier

Part Number: AC-EPIC1200

SKU: AC-EPIC1200 Categories: ,

The Epicenter 1200

High-power subwoofer amplifier

When car audio systems demand high levels of sub-woofer power output into difficult loads, and a wide range of adjustment to optimize the sub-woofer performance within the system, the AudioControl EPICENTER® 1200 power amplifier are the ideal solution.

The EPICENTER 1200 has built in 2 channel high level input perfectly suited to vehicles with high powered factory audio systems with up to 400 watts of input.

Installation is a breeze with the built in MILC (Maximum Input Level Control) patent pending circuitry designed to warn the installer/user of unwanted clipping or distortion via 2 LED units providing the maximum levels for clean input signal and amplifier gain settings.

The EPICENTER 1200 delivers high current, stable down to 1 Ohm output and has a removable top cover that allows access to controls for THE EPICENTER® effect, crossover frequency, gain, polarity, subsonic filter, signal sense and expansion bus mode.

Performance Auto and Sound Magazine USA review –> Click Here


  • High Current Design – 1 Ohm Stable
  • 1200 watts at 1 Ohm
  • THE EPICENTER® Digital Bass Restoration
  • MILC™ Maximum Input Level Control (Patent Pending)
  • 24 dB/octave Linkwitz-Riley Alignment Crossover
  • GTO Signal Sense
  • PFM Subsonic Filter
  • Line-Level RCA Inputs and Active Speaker-Level Inputs
  • Solid One-Piece Aluminum Chassis
  • Remote Control for Subwoofer Level and THE EPICENTER® effect
  • Expansion Bus


Preamp Inputs: High Level Input,1x Low Level RCA Input, 1x Expansion Bus
Input Voltage Range: 200 mV – 6 V RMS

Rated Continuous (RMS) Power at 14.4V:
4 Ω – 400 W x 1 RMS
2 Ω – 750 W x 1 RMS
1 Ω – 1200 W x 1 RMS
Expansion Bus Output: Buffered, post-processing

Frequency Response: 16 Hz – 250 Hz
Signal to Noise: 107 dBa, Ref 1200 W at 1 Ohm
Damping Factor: 770 at 10 V, 4 Ohm Output, 100 Hz
THD+N: < 0.1% Bass Processing: The Epicenter® Minimum Power / Ground Wire Gauge: 0 AWG wire Fuse Rating: 3 x 40 A Low-Pass Filter: 24dB/Octave Linkwitz-Riley, Adjustable From 30 Hz – 250 Hz PFM Subsonic Filter: 18dB/Octave, Selectable 16 Hz or 32 Hz Output Polarity Switch: Yes Weights & dimensions
Dimensions: 12″W x 7.95″D x 2.1″H
Weight: 6.6lbs (3.0kg)
in the box: THE EPICENTER® 1200, ACR-3 Remote, Speaker connector, Fuses, Manual, Warranty


Owners manual – DOWNLOAD
Sales Note – DOWNLOAD
Literature – DOWNLOAD