ACEPIC600-WEB
EPIC600-1EPIC600-3

AudioControl EPICENTER 600 Monoblock Amplifier

Part Number: AC-EPIC600

SKU: AC-EPIC600 Categories: ,

The Epicenter 600 Mono-block Amplifier

High-power subwoofer amplifier

When car audio systems demand high levels of sub-woofer power output into difficult loads, and a wide range of adjustment to optimize the sub-woofer performance within the system, the AudioControl EPICENTER® 600 power amplifier are the ideal solution.

The EPICENTER 600 has built in 2 channel high level input perfectly suited to vehicles with high powered factory audio systems with up to 400 watts of input.

Installation is a breeze with the built in MILC (Maximum Input Level Control) patent pending circuitry designed to warn the installer/user of unwanted clipping or distortion via 2 LED units providing the maximum levels for clean input signal and amplifier gain settings.

The EPICENTER 600 delivers high current, stable down to 1 Ohm output and has a removable top cover that allows access to controls for THE EPICENTER® effect, crossover frequency, gain, polarity, subsonic filter, signal sense and expansion bus mode.

Features

  • High Current Design – 1 Ohm Stable
  • 600 watts at 1 Ohm
  • THE EPICENTER® Digital Bass Restoration
  • MILC™ Maximum Input Level Control (Patent Pending)
  • 24 dB/octave Linkwitz-Riley Alignment Crossover
  • GTO Signal Sense
  • PFM Subsonic Filter
  • Line-Level RCA Inputs and Active Speaker-Level Inputs
  • Solid One-Piece Aluminum Chassis
  • Remote Control for Subwoofer Level and THE EPICENTER® effect
  • Expansion Bus

Specifications

Inputs
Preamp Inputs: High Level Input,1x Low Level RCA Input, 1x Expansion Bus
Input Voltage Range: 200 mV – 6 V RMS

Outputs
Rated Continuous (RMS) Power at 14.4V:
4 Ω – 200 W x 1 RMS
2 Ω – 350 W x 1 RMS
1 Ω – 600 W x 1 RMS
Expansion Bus Output: Buffered, post-processing

Performance
Frequency Response: 16 Hz – 250 Hz
Signal to Noise: 104 dBa, Ref 600 W at 1 Ohm
Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz
THD+N: < 0.1% Bass Processing: The Epicenter® Minimum Power / Ground Wire Gauge: 0 AWG wire Fuse Rating: 2 x 40 A Low-Pass Filter: 24dB/Octave Linkwitz-Riley, Adjustable From 30 Hz – 250 Hz PFM Subsonic Filter: 18dB/Octave, Selectable 16 Hz or 32 Hz Output Polarity Switch: Yes Weights & dimensions
Dimensions: 9″W x 7.95″D x 2.1″H
Weight: 4.5lbs (2.0kg)
in the box: THE EPICENTER® 1200, ACR-3 Remote, Speaker connector, Fuses, Manual, Warranty

Downloads

Owners manual – DOWNLOAD
Sales Note – DOWNLOAD
Literature – DOWNLOAD